arty zan

  • Festivus Fun has Started
  • The Draw Your Favorite Staff Member Winner is TxRebel or Mark .

  • The Draw Your Favorite Staff Member 2nd place is Padawan1972 .

  • The Draw Your Favorite Staff Member 3rd place is RivetGrrl.

  • The Holiday Recipe winner is Lilly_of_the_Zoo.

  • The Holiday Recipe 2nd place winner is the green bandit.

  • The Holiday Recipe 3rd place winner is Bigg Al.

  1. arty zan

    Dyanvap - All Things Dynavap

    This thread is for "All Things Dynavap", so whether it be the original Vap cap, Vongs, M Series, Omni's, Dyna Coils, Stainless Steel, Titanium or third party additions, please share your knowledge with us here.:d5: Handy hints and tips,Advice on cleaning,Care of wooden Vong bodies, New ways of...
  2. arty zan

    Indoor Grow Arty Grows: Rainbow Stone & Citrus Noir

    Arty Grows: Rainbow Stone & Citrus Noir 2 strain from The Autoflower Portal It has been a while since my last grow as I only grow for myself and my family and my missus. I'm a vaper and only then in the evening after the day's work and chores are done and any time I chooses on weekends and...
  3. F.N.

    GGG4, CDLC, YETI OG

    Here is my grow of these fine genetics. They will be fed Green Planet nutrients hydrofuel Bloom, procal, vitathrive, liquidW8, rootbuilder tea, massive, dense, and finisher.
  4. G

    Current Live Stoners Gossip June/July/August 2017

    Love night fishing for channel cats...good times!!
  5. BigSm0

    Sizing drivers, Series vs paralell - by BigSm0

    Long overdue. Guys and gals please read this entire thread before making any purchases or wiring any sort of light fixture up. Making the most out of your driver and how to make sure they fit your needs. Paralell wiring Voltage output and amperage are the two most important things for...
  6. BigSm0

    DIY skills are priceless.

    I started a thread awhile back to help folks through the building and wiring process. 2 reasons I didn't finish it was one the machinist is a dick and I have waited months for the necessary brackets and now the second reason is this is even confusing me lol. It is massive 28"x48" in total...
  7. budelee

    May attempt a DIY cob build need help

    hi guys , @BigSm0 recommended i start here so here i am..a bit about my goal and my current conditions/equipment... I open grow due to uncontrollable heat issues in a tent setup..i currently run 2 HID setups,a MH/HPS ,both 600 watts. I grow in coco,2 gallon geo pots and am set on that part,the...
  8. Rebel

    [ARCHIVE] Old Live Stoners Gossip (up to Feb 2017)

    Oh yeah!! It is indeed!! I got the 151 already!!
  9. BigSm0

    DIY mars conversion. Questions and answers here.

    I think since this DIY section was started here at Afn there has been allot of responses towards the mars conversion. I have hacked a lot of them, built dozens of lights and feel very confident in assisting others. Soooo if you have a mars and need advice ask away. To start it is best to...
  10. budelee

    Official Optic Foliar Cannazone Test Thread

    Welcome to another great Cannazone test Sponsored by :worship:Dinesh and Optic Foliar:worship: :welcome:First we Start with a Giant Thank You to Dinesh for sponsoring this test. Optic Foliar has graciously given the test team a Huge supply of their products to put on the hot seat, and I'm sure...
  11. arty zan

    Northern Grow Lights - Test Team Home - DIY build and Grow

    Hey there fellow AFNers. AFN, Northern Grow Lights & Dinafem have teamed up for a DIY LED Build and grow show. Amit has kindly donated a majority of the parts to build a DIY LED COB grow light and we will supply out own LED drivers and wire. The members of the NGL test team will each be...
  12. arty zan

    Northern Grow Lights - Test Team Home - DIY build and Grow

    Hey there fellow AFNers. AFN, Northern Grow Lights & Dinafem have teamed up for a DIY LED Build and grow show. Amit has kindly donated a majority of the parts to build a DIY LED COB grow light and we will supply out own LED drivers and wire. The members of the NGL test team will each be...
  13. arty zan

    DIY LED ELECTRICAL DISCLAIMER! ALL LED BUILDERS MUST READ BEFORE BUILDING AND POSTING IN THIS FORUM!

    DIY LED section Disclaimer !!!ELECTRICAL SAFETY WARNING!!! Electrical builds have several inherent risks and dangers which can pose the risk of fire, electrical shock, severe burns and can lead to serious permanent and disabling injuries, including death. This inherent risk and danger is not...
  14. phlemthrower

    Phlems first log.

    Hi, This is my first log of a grow. It's taken me a while to find where to post a grow on here. I hope I have found the right place. lol. The girls I'm logging are now 10 days after popping up above ground. I planted a RQS royal dwarf and a royal critical. 1 night in pH 6 rain water in...
  15. Son of Hobbes

    Welcome Northern Grow Lights LED's (Photon Labs LLC)

    We'd like to extend a warm welcome to Northern Grow Lights LED's (Photon Labs LLC) @PhotonLabs for coming on to AFN for a 6 month live vendor trial! @PhotonLabs has agreed to send five of our Cannazone testers the equipment needed to build five, DIY COB LED fixtures and will help head our first...
  16. HLG1

    Vero 29 DIY Build

    Making a 190W Lamp with cheep Meanwell LPC 100W drivers and Bridgelux Vero 29 3500K 80 CRI COB LED and Khatod Silicone Optics for a even coverage in a 2x2.5 tent List of Parts 2x Khatod 90 Silicone 2x Bridgelux Vero 29 3500K 80 CRI 2x Meanwell LPC100-2100 Junction box and PG7/PG9 cable...
  17. hecno

    So many questions .

    Great info guys , I will have a number of questions , but the main one that stumps me at the moment and I can't seem to find the answer for --- how do you work out the number of cobs for your room size , I have a 4 foot by 4 foot area . :thumbsup:
  18. mjau

    DIY Cree CXB 2530

    Just saw this section and decided to post here. I rebuilded my CXB 2530 panel yesterday to improve cooling. First one was sloppy made and fast, I was in a hurry. This one is better but also fast made so not very clean but who cares. It has 4xCXB 2530 3000K T4 bin cobs on Meanwell...
  19. Son of Hobbes

    Welcome to the AFN DIY LED Building Forum!

    Due to the increasing amount of requests for a DIY LED building section, we decided to create a forum specifically for it! @arty zan will be assisting with the LED moderating and has been doing a stand-up job since we've invited him on to help with LED material, let's give him a warm welcome...